639782-1 1-19
Safety
FIG. 56:
22. 12 volt - see the Lubrication & Maintenance
section.
Located on chassis frame near main power key.
This machine is equipped with a 12 volt electrical
system.
m
WARNING: Never jump start a 12 volt
system with a 24 volt power supply.
Explosion hazard can occur causing
serious injury or death.
FIG. 57:
23. Ground connection - see the Lubrication &
Maintenance section.
Located on chassis frame behind engine.
FIG. 58:
24. Danger - Explosion Hazard - Disconnect Battery.
Safety sign is located on battery hold down
bracket.
Improper jumper cable connections can cause
explosion resulting in personal injury.
FIG. 56
FIG. 57
FIG. 58
To Next Page
Loading...