7 . ACCESSORIES AND OPTIONS
7.10
Challenger MT500B EU
7.2.6 - Use when working
• Before starting your work, select the required memory
(1 to 4); refer to paragraph 7.2.4 "MEMORY MODE".
• Press the memory key ref.10 (Fig. 7), then press one of
the keys ref. 6 corresponding to the required memory;
the selection is displayed in grey.
• Press key ref.10 again: the pre-recorded data (name,
implement, etc.) is displayed at the top of the screen,
The half-screens display the last selections stored when
quitting, before selecting "MEMORY MODE".
Fig. 7
10
10
1 2 3 4
6
V913
V921
V913
1000
9 8 0
RPM
1 8 5 0
4. PLOUGH.
4. PLOUGH.
1. SEEDER.
To Next Page
Loading...
