5
PROGRAM A TEMPORARY PIN - NUMBER OF HOURS
Programming
Enter any programmed
PIN, then press and hold
the button until the garage
door opener light bulb
flashes 3 times.
1
NOTE: This feature is not available on garage door openers that have a green Learn button or an external receiver.
A temporary 4-digit PIN can be programmed to allow access to visitors. Each programmed PIN can program one temporary PIN. The temporary PIN
can be set for a number of hours or a number of door openings. The temporary PIN cannot be the same as any previously programmed PIN.
Enter the temporary 4-digit
PIN of your choice, then
press the ENTER button.
The garage door opener
light bulb will flash 4
times.
x4
Press the number of
hours the temporary PIN
will work (up to 255).
Then press the * button.
The garage door opener
light bulb will flash once.
3
To test, press the
temporary PIN, then press
the ENTER button. The
garage door opener will
activate.
4
x3
To Next Page
Loading...
Need help?
General
