EasyManua.ls Logo

Chamberlain CR550 User Manual

Chamberlain CR550
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CR550
Rolling Garage Door Opener
Installation and Operating Instructions
www.chamberlainanz.com
Owners Copy: Please keep these instructions for future reference
This manual contains IMPORTANT SAFETY information
DO NOT PROCEED WITH THE INSTALLATION BEFORE READING THOROUGHLY
Question and Answer IconNeed help?

Do you have a question about the Chamberlain CR550 and is the answer not in the manual?

Chamberlain CR550 Specifications

General IconGeneral
Horsepower1/2 HP
Battery BackupNo
Drive SystemChain Drive
Security+ Rolling Code TechnologyYes
Max Door Height7 ft (extension kits available for 8 ft doors)
Smart Home CompatibilityMyQ Compatibility (requires MyQ Smart Garage Hub or MyQ-enabled garage door opener)
Warranty1-year limited
Remote ControlYes

Summary

Start Reading Important Safety Instructions

General Safety Warnings

Key safety precautions for installation and operation of the garage door opener.

Carton Inventory

Tools Required

Garage Door Requirements

Independent Clamping

Method for attaching the opener bracket to the door axle.

Direct Clamping

Alternative method for attaching the opener bracket to the door axle.

Testing the Door

Installing the Stop Collar

Installing the Weight Bar

Opener Preparation

Attaching Extension Poles

Instructions for fitting extension poles to the opener gear.

Pinning the Door

Installation Steps

Right Hand Installation

Steps for installing the opener on the right side of the door.

Left Hand Installation

Steps for installing the opener on the left side of the door.

Attach the Release Handle and Cord

Manual Release Operation

Disengage Opener

Procedure to put the opener into manual mode.

Re-engage Opener

Procedure to return the opener to automatic mode.

Setting Travel Limits

Preparation

Steps before setting the travel limits.

Setting Top Limit

Procedure to define the fully open door position.

Setting Bottom Limit

Procedure to define the fully closed door position.

Save and Test Limits

Saving limits and testing the opener's movement.

Setting the Force

Testing the Safety Reverse System

Fixing Warning Labels

Install IR Beams (Protector System)

Installation and Adjustment

Steps for installing and adjusting the IR safety beams.

Wireless Programming

Add Transmitters

Procedure to program remote transmitters to the opener.

Delete All Transmitter Codes

Procedure to erase all stored transmitter codes.

Keyless Device Programming

Keypad 8747AML Programming

Programming the wireless keypad using the learn button.

Control Panel Programming

Programming using the multi-function control panel.

Special Features

Multifunction Control Panel Wiring

Wiring instructions for the multifunction control panel.

IR Beams Wiring

Wiring instructions for the IR safety beams.

Accessories

Transmitter Wall Mount Bracket

Instructions for mounting the transmitter bracket.

Troubleshooting

Opener Not Operating

Troubleshooting opener not responding to controls.

Wired Wall Control Issues

Troubleshooting wired wall control problems.

Wireless Control Issues

Troubleshooting wireless control issues.

Short Transmitter Range

Troubleshooting short transmitter range.

Unexpected Door Movement

Troubleshooting unintended door opening or closing.

Partial Opening Reversal

Troubleshooting door reversing before fully opening.

Random Reversal & Blinking Lights

Troubleshooting random reversal and blinking lights.

Closing Issues or Reversal

Troubleshooting door closing problems or reversal during closing.

Opener Strain or Difficulty

Troubleshooting opener strain or difficulty operating.

Motor Humming, No Operation

Troubleshooting motor humming but not operating.

Operation During Power Failure

Troubleshooting operation during power failure.

Manual Limit Adjustment

Manual adjustment of door travel limits.

Opener Operation

Manual Door Operation

Procedure for manual door operation.

Opener Care

Limit and Force Settings Check

Checking and adjusting limit and force settings.

Transmitter Battery Replacement

Information on replacing transmitter batteries.

Opener Maintenance

Monthly Maintenance Tasks

Monthly maintenance tasks for the opener.

Specifications

Limited Warranty

Warranty Terms

Details of the warranty provided by Chamberlain.

Warranty Exclusions

Conditions not covered by the warranty.

Accessories Warranty

Warranty terms for accessories.

Australian Liability

Consumer law liability in Australia.

New Zealand Liability

Consumer law liability in New Zealand.

Related product manuals