Chamberlain INSL24UL - Step 8 Close and Secure the Door; Step 9 Install Warning Signs

20
Step 8 Close and Secure the Door
Before securing the door, follow the instructions in the Adjustment
section to adjust the limits, speed, and force.
1. Close the door.
2. Turn both latches 90 degrees.
Step 9 Install Warning Signs
Installers MUST install the UL required warning signs. The signs MUST
be installed in plain view on both sides of each gate installed. Use the
fastening holes in each corner to permanently secure the sign.
Place warning signs
on both sides of the
gate in clear view
The basic installation is complete.
INSTALLATION