Chamberlain KLIK3C-BL User Manual

UNIVERSAL REMOTE CONTROL
The remote control can be programmed to
activate up to two products, such as a
garage door opener, gate operator, or
commercial door operator. Each button on the remote control
works independently of the other and must be programmed
separately. The images throughout this manual are for
reference only and your product may look different.
MODEL KLIK3C
MODEL KLIK3C-BL
MODEL KLIK3C-PK
To prevent possible SERIOUS INJURY or DEATH from a
moving gate or door:
• ALWAYS keep remote controls out of reach of
children. NEVER permit children to operate, or play
with remote control transmitters.
• Activate gate or door ONLY when it can be seen
clearly, is properly adjusted and there are no
obstructions to door travel.
• ALWAYS keep gate or door in sight until completely
closed. NEVER permit anyone to cross path of moving
gate or door.
Read instructions thoroughly BEFORE
beginning. If using the Universal Remote
Control with residential door openers, the remote
control must be used only with door openers
manufactured after 1993 that utilize photoelectric
sensors. The photoelectric sensors are always located on or
near the bottom of the door track.
STOP

Chamberlain KLIK3C-BL Specifications

General

Brand	Chamberlain
Model	KLIK3C-BL
Buttons	3
Frequency	315 MHz
Range	Up to 1, 500 feet
Color	Black
Compatibility	Chamberlain, LiftMaster, Craftsman garage door openers
Security	Security+
Battery	CR2032

Summary

Universal Remote Control Overview

Important Safety Warning

Crucial safety precautions to prevent serious injury or death from moving gates or doors.

Getting Started

Identify Programming Method

Determine if your product uses a Program/LEARN button or DIP SWITCHES for programming.

Programming Procedure

Initiate Programming on Remote

Press and hold the remote's program button until the LED illuminates.

Activate Opener Programming

Press and release the Program/LEARN button on the garage door opener.

Select Remote Button and Cycle

Press the remote button a specific number of times based on the opener brand and year.

Programming Details and Saving

Opener Brand Programming Chart

Table correlating opener brands, button types, years, and button press counts for programming.

Save Programmed Setting

Press the program button on the remote control to finalize the programming.

Testing and Battery Information

Test Remote Operation

Verify the remote control functions correctly by pressing its button.

Battery Replacement and Safety

Instructions for safe battery replacement and warnings regarding handling.

Compliance and Support

FCC and Industry Canada Compliance

Details on regulatory compliance, permitted operations, and restrictions for the device.

Additional Assistance

Information on how to get further help via website or phone support.