Chamberlain KLIK3C User Manual

To prevent possible SERIOUS INJURY or DEATH from a moving gate or door:
• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote control
transmitters.
• Activate gate or door ONLY when it can be seen clearly, is properly adjusted and there are no obstructions to door travel.
• ALWAYS keep gate or door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door.
Models KLIK3U, KLIK3U-BK,
KLIK3U-BL, KLIK3U-BK2, KLIK3U-BL2,
KLIK3U-SS, KLIK3C, KLIK3C-BK,
KLIK3C-BL, KLIK3C-SS, KLIK3C-BK2,
KLIK3C-BL2
Read instructions thoroughly BEFORE beginning.
If using the Universal Remote Control with residential door openers, the remote control must be used only with
door openers manufactured after 1993 that utilize photoelectric sensors. The photoelectric sensors are always
located on or near the bottom of the door track.
STOP
UNIVERSAL REMOTE
CONTROL
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause
cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Chamberlain KLIK3C Specifications

General

Type	Remote Control
Brand	Chamberlain
Model	KLIK3C
Compatibility	Chamberlain and LiftMaster garage door openers
Buttons	3
Frequency	315 MHz
Security	Rolling code technology
Battery	CR2032

Summary

Garage Door Opener Programming

Programming a Genie® Intellicode® 2 Opener

Specific programming steps for Genie Intellicode 2 models.

Commercial Door Operator Programming

Gate Operator Programming

External Receiver Programming

Programming with DIP Switches

Guide for programming via DIP switches on external receivers.

Programming with a LEARN Button

Guide for programming via LEARN button on external receivers.

Troubleshooting and Support

Troubleshooting DIP Switch Programming

Solutions for common DIP switch programming issues.

Troubleshooting LEARN Button Programming

Solutions for common LEARN button programming issues.

Remote Control LED and Range Issues

Addresses LED not lighting and proximity activation problems.

Battery Information

Battery Warnings and Replacement