EasyManua.ls Logo

Chamberlain KLIK5U-BK2 User Manual

Chamberlain KLIK5U-BK2
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
®
®
MODEL KLIK3U-BK2
MODEL KLIK3U-SS
MODEL KLIK5U-BK2
MODEL KLIK5U-SS
UNIVERSAL REMOTE CONTROL
Your remote control can be programmed to operate
up to two devices, such as a garage door opener,
gate operator,or commercial door operator and has
a SMART/ LEARN button. Each button on the
remote control works independently of the other
and must be programmed separately. The images
throughout this manual are for reference only and
your product may look different.
STOP
Read instructions thoroughly
BEFORE beginning. If you are using
this product with residential door
openers, this product must be used
only with door openers manufactured
starting January 1, 1993 that use photoelectric
sensors located near the bottom of the door track.
IMPORTANT: The remote will activate your door or
gate during programming. Be sure the door is clear
of ALL obstructions. Start with the garage door
closed. Make sure the garage door opener has a
working light because it is a programming indicator.
WARNING: This product can expose you
to chemicals including lead, which are
known to the State of California to cause
cancer or birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov

Other manuals for Chamberlain KLIK5U-BK2

Question and Answer IconNeed help?

Do you have a question about the Chamberlain KLIK5U-BK2 and is the answer not in the manual?

Chamberlain KLIK5U-BK2 Specifications

General IconGeneral
BrandChamberlain
ModelKLIK5U-BK2
Buttons2
ColorBlack
Weight1.6 ounces
TypeUniversal Remote Control
Frequency315 MHz
BatteryCR2032
CompatibilityWorks with most major brands of garage door openers manufactured after 1993

Summary

Universal Remote Control Overview

Pre-Programming Safety and Instructions

Essential safety and preparation steps before programming the remote control.

California Proposition 65 Warning

Information regarding potential chemical exposure and state regulations.

Getting Started

Identifying Programming Features

Determine if your device uses a SMART/LEARN button or DIP Switches for programming.

Programming to Yellow Learn Button Openers

Programming Steps for Yellow Learn Button

Step-by-step guide to program the remote to a garage door opener with a yellow LEARN button.

Programming to Compatible Garage Door Openers

Steps and Brand Compatibility Guide

Instructions and a compatibility chart for programming various garage door opener brands.

Battery Information

Battery Replacement and Safety

Guidelines for replacing batteries and safety precautions to prevent injury or damage.

Need Help?

Support and Compliance Information

Contact support for assistance and read compliance notices regarding device operation.

Related product manuals