Chamberlain KLIK3U User Manual

To prevent possible SERIOUS INJURY or DEATH from a moving gate or door:
• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote control
transmitters.
• Activate gate or door ONLY when it can be seen clearly, is properly adjusted and there are no obstructions to door travel.
• ALWAYS keep gate or door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door.
Universal Remote Control
Read instructions thoroughly BEFORE beginning.
If using the Universal Remote Control with residential door openers, the remote control must be used only with
door openers manufactured after 1993 that utilize photoelectric sensors. The photoelectric sensors are always
located on or near the bottom of the door track.
STOP
MODEL KLIK3U

Chamberlain KLIK3U Specifications

General

Brand	Chamberlain
Model	KLIK3U
Category	Remote Control
Language	English

Summary

Getting Started

Product Type Programming Locations

Location of LEARN button or DIP switches for Garage Door, Commercial, Gate operators, and External Receivers.

Garage Door Openers

Programming with a LEARN Button

Detailed instructions on how to program the remote to a garage door opener using its LEARN button.

Programming Genie Intellicode 2

Specific steps to program the remote to a Genie Intellicode 2 garage door opener.

Commercial Door Operators

Programming with a LEARN Button

Instructions for programming the remote to a commercial door operator using its LEARN button.

Gate Operators

Programming with a LEARN Button

Instructions for programming the remote to a gate operator using its LEARN button.

GTO/Mighty Mule Programming (No Remote)

Steps to program the remote to a GTO/Mighty Mule gate operator without a prior remote.

GTO/Mighty Mule Programming (With Remote)

Steps to program the remote to a GTO/Mighty Mule gate operator using an existing remote.

External Receivers

Programming with DIP Switches

How to program the remote to an external receiver using DIP switches.

Programming with a LEARN Button

How to program the remote to an external receiver using a LEARN button.

Alternative Programming Options

Alternative for LEARN Button Products

An alternate procedure for programming products that use a LEARN button.

Alternative for DIP Switch Products

An alternate procedure for programming products that use DIP switches.

Troubleshooting

DIP Switch Programming Issues

Solutions for when the remote won't program to products with DIP switches.

LEARN Button Programming Issues

Solutions for when the remote won't program to products with a LEARN button.

Remote LED Problems

Addresses issues where the remote LED does not light, is dim, or only works up close.

Locate LEARN Button - Chamberlain Products

Locate LEARN Button - Genie Products

Locate LEARN Button - Linear Products

Locate LEARN Button - Wayne Dalton Products

Locate LEARN Button - Liftmaster Products

Locate LEARN Button - Overhead Door Products

Locate LEARN Button - Stanley Products

Battery

Battery Replacement and Safety

Details on using the correct battery type, safety precautions, and proper disposal.