Need help?Do you have a question about the Chamberlain MH 5011U and is the answer not in the manual?
General| Type | Chain Drive |
|---|---|
| Horsepower | 1/2 HP |
| Remote Control | Yes |
| Frequency | 60 Hz |
| Motor Type | AC |
| Security+ 2.0 | Yes |
| Battery Backup | No |
| Max Door Height | 7 ft |
| Voltage | 120V |
| Warranty | 1-year limited |
Explains C2 and B2 wiring types, LMEP requirement, and auto-conversion between modes.
Details features and benefits of the B2 wiring type with monitored entrapment protection.
Covers programming single-button, 3-button, and erasing all remote controls for the operator.
Instructions for programming, verifying, clearing, and disabling the Timer-to-Close feature.
Covers testing control stations, entrapment devices, limit adjustments, and remote controls.
Procedures for disconnecting and reconnecting the door from the operator for manual use.
Specific steps for the MT/BMT models to disconnect the door arm from the operator.
Emergency disconnect procedures for MH, MHS, MJ, and MGJ models.
Addresses common problems like no response, noise, door drift, and unexpected reversal.
Recommended service intervals and testing frequency for operator maintenance.
Lists various 315 MHz Security+ remote controls and wireless access keypads.
Details control stations, monitored entrapment protection systems, and safety edges.
Lists mounting brackets and chain tensioners for operator installation.
Describes kits for single button control, door-in-motion, and external antennas.
To Next Page