To Next PageTo Next Page
Need help?Do you have a question about the Chamberlain MT800 and is the answer not in the manual?
General| Type | Chain Drive |
|---|---|
| Battery Backup | Yes |
| Voltage | 120V |
| Security | Rolling Code Technology |
| Connectivity | Wi-Fi |
| Safety Features | Safety Sensors |
| Motor Type | AC |
| Drive Type | Chain |
| Smart Connectivity | MyQ Smartphone Control |
| Warranty | Limited Lifetime (Motor) |
Essential safety warnings and guidelines for installation and operation of the garage door opener.
Pre-installation checks including wall support, door balance, and safety considerations before starting.
Step-by-step instructions for assembling the garage door opener rail sections.
Guide for correctly installing the drive chain or belt onto the opener's trolley mechanism.
Procedure for inserting the drive mechanism into the rail and attaching the header sleeve.
Steps to connect the trolley assembly to the garage door opener rail.
Securing the rail to the opener unit and ensuring the chain or belt is properly on the sprocket.
Instructions for fitting the protective cover over the opener's drive sprocket.
Guidance on adjusting the tension of the drive chain or belt for optimal operation.
Instructions for determining the correct mounting position for the header bracket on the wall or ceiling.
Steps for securely fastening the header bracket to the garage wall or ceiling structure.
Connecting the assembled rail section to the installed header bracket.
Guidance on placing the opener unit correctly relative to the door and rail.
Steps for securely mounting the opener unit to the garage ceiling or support structure.
Installing the manual release mechanism for emergency door operation.
Fitting the light bulb and lens cover into the garage door opener unit.
Attaching the door bracket to the garage door for connection to the opener's arm.
Connecting the straight and curved door arm sections and attaching them to the door and trolley.
Wiring and mounting the wall-mounted door control panel.
Adjusting the fully open and fully closed positions for the garage door opener.
Adjusting the amount of force required to open and close the garage door.
Performing the critical safety reverse test to ensure proper obstruction detection.
Instructions for operating the optional motion detecting control panel features.
Wiring instructions for connecting the infrared safety beams to the opener.
Configuration steps for the automatic closing feature, requiring the Protector Systemâ„¢.
Procedure for programming additional remote controls to the garage door opener.
Programming remotes using the optional motion detecting control panel.
Instructions for clearing all previously programmed remote control codes.
Programming keyless entry remotes using the opener's learn button.
Programming keyless entry with the C98 motion detecting control panel.
Programming the C379 fingerprint access system to the opener.
Details the Auto Close feature, which requires the Protector Systemâ„¢ for activation.
Information on connecting a 'door within a door' feature and its wiring requirements.
Using an adaptor to improve transmitter range for the garage door opener.
Connecting an external radio receiver or accessory for additional functionality.
Provides wiring guidance for various accessories like keyswitches and door control panels.
Resolving issues where the opener does not respond to door controls or remotes.
Troubleshooting problems related to remote control range and operation.
Diagnosing and fixing issues where the door reverses unexpectedly or fails to close.
Addressing problems with the door stopping or straining during operation.
Resolving issues related to the opener's indicator lights and power supply.
Troubleshooting problems with door limits and manual limit setting.
Instructions on how to manually open or close the garage door using the release handle.
Recommended monthly maintenance tasks, including safety tests and balance checks.
Recommended annual maintenance tasks, including lubrication of moving parts.
Tips for using and maintaining the remote control transmitter and its battery.
Details the warranty terms, limitations, and liabilities specific to Australia.
Details the warranty terms, limitations, and liabilities specific to New Zealand.
Provides contact details for Chamberlain service centres in Australia and New Zealand.
