CHAMELEON IHD3-PPMID - Understanding the Basics of Your In-Home Display; Using the Built-in Tutorial; Displaying Meter Information; Maintaining Smart Meter Connection

Your In-Home Display
shows information from
your smartmeters
An In-Home Display (IHD) is
an electronic device that talks
wirelessly to your smart meters.
It updates every 30 minutes
and shows your energy usage,
measured in kilowatt-hours
(kWh), and the cost, shown
in pounds and pence. This
information can give you a
better idea of how much energy
dierent appliances use.
Once you know that, you can
save money by making more
informed choices about when
and how you use them.
Your In-Home Display needs
to maintain a connection
withyour smart meter
To make the most of your
display, it’s useful to keep it
plugged in somewhere you
caneasily see it.
Wherever you choose, check
the signal strength by looking at
the
symbol on the top left of
the screen (marked
1
when you
turn the nextpage in this book).
The more stripes, the stronger
the signal. If the signal is weak,
move the In-Home Display closer
to your electricity smartmeter.
Understanding
the basics
Good news! There’s a built-in tutorial
The tutorial uses sample data to show what happens when you press
each button. You can’t accidentally switch o your energy or change
the tari, so you should feel comfortable having a poke around.
To start the tutorial, press OK and then press the big Forward Arrow
on the right 5 times until you see the words ‘Tutorial [OK]’. Found it?
Press OK again to get started.