Champion instruments PRO - 2.7. Connecting to Carlson SurvCE as a Network Rover

2.6. Connecting to an Office Computer
The receiver can be connected to an office computer for
serial data transfer or settings via a GPS to PC Data Cable.
Before you connect to the office computer, ensure that the
receiver is powered on by the internal battery or external
power.
The following figure shows how to connect to the computer
for data transfer:
2.7. Connecting to Carlson SurvCE as a Network Rover
1. Turn on the controller → run SurvCE → tap the Equip
tab in the main menu.
2. In the Equip screen, select the GPS Rover button.
For the Manufacture field, select Champion Instruments
and Pro for the Model field.
GPS to PC data cable
17