11
Dishwasher access doors are equipped with a door safety switch that automatically
stops the dishwasher pumps and conveyor drive if a door is raised while the dishwasher
is running. In addition, the diswasher will not start if a door is left open.
1. If the dishwasher is running and a door is raised, then lighted GREEN START
pushbutton goes out and the pumps and conveyor drive stop.
2. Check the interior of the dishwasher for any dishracks still in the machine.
These dishracks must be washed again to ensure they are washed and sanitized
completely.
3. To restart the dishwasher, make sure all doors are closed, then push the GREEN
START pushbutton.
4. Insert a dishrack into the dishwasher until the pumps and conveyor run.
Operation
The illustrations below and on the proceeding pages illustrate how to install and
remove the sprayarm assemblies and scrap screens.
Operation
Door Safety Switches
Sprayarms and Scrap Screens
Removing the lower sprayarm assembly
To Next Page
Loading...
