What to do if my Champion Dishwasher will not drain?
If the Champion Dishwasher isn't draining, start by cleaning the drain screen. If the issue persists, it could be a defective drain valve or a clogged building drain, in which case you should contact a service agent or building maintenance, respectively.
How to improve poor wash results from Champion M2 Dishwasher?
If you're experiencing poor wash results with your Champion Dishwasher, first, reposition the wares in the dish rack or reduce the amount of wares. Next, clean the screens and spray arms. If the issue persists, there may be a chemical injector or detergent dispenser malfunction, or the water temperature may be low.
What to do if chemicals won’t feed into Champion Dishwasher?
If chemicals aren't feeding into your Champion Dishwasher, first, refill the chemical container if the chemical supply is low. Also, check the supply tubing for kinks and straighten it if necessary.
Why is my Champion M2 not running?
If your Champion Dishwasher isn't running, make sure the hood is completely closed. Also, check the breaker on the panel to ensure the main power is on. Finally, verify that you've selected a cycle (1, 2, 4, or 6 minutes).
Why is there low or no water in my Champion Dishwasher?
If your Champion Dishwasher has low or no water, first, ensure the main water supply is on by opening the supply valve. Then, check that the PRV setting is correct (20-22 PSI flowing).
Why is steam not being vented from Champion Dishwasher?
If the Condensate Removal Option Model Steam is not being vented from your Champion Dishwasher, check the incoming cold water temperature to ensure it is not above 75°F/24°C. Also, verify that the incoming water pressure is not below 45 PSI flowing pressure at the dishwasher.
General| Brand | Champion |
|---|---|
| Model | M2 Series |
| Category | Dishwasher |
| Language | English |
To Next Page