Cleaning
Cleaning
• Remove the scrap screens and pump suction strainer Flush/backflush the screens in a sink.
Do not strike the screens against hard surfaces.
• Clean the drain in the bottom of the wash tank.
• Clean the float switch.
• Wipe the interior with a soft cloth. Reinstall the scrap screens and spray arms making sure
the spray arms spin freely.
• Wipe the exterior clean with a soft cloth and mild detergent.
DO NOT FLUSH THE EXTERIOR OF THE MACHINE WITH WATER.
• Leave the doors open to aid in overnight drying of the machine interior.
PUMP STRAINER
Fig. 9
SCRAP SCREENS X 2
DRAIN
11
To Next Page
Loading...
Need help?
General
