To Next PageTo Next Page
Need help?Do you have a question about the Chapin 82500 and is the answer not in the manual?
Features a one-piece solid stainless steel 100lb hopper without welds and with rolled edges.
Details the elevated grate, enclosed gears, solid linkage, salt auger, and baffle for controlled product distribution.
Highlights 14-inch tires for stability and the included grate and rain cover.
Displays all necessary hardware parts (H-2 through H-13) for assembly, shown at actual size.
Lists and illustrates spreader components (C-5 through C-16), not shown at actual size.
Guides through initial steps (1.1-1.4) of attaching the handle bar and gate control mechanisms.
Details further assembly stages (1.5-1.8) for the handle bar and gate control system.
Covers the final steps (1.9-1.10) for assembling the handle grips and finishing the control assembly.
Illustrates the process (2.1) of connecting the frame legs to the main hopper unit.
Shows the completion (2.2) of the frame legs assembly, including wheel attachment.
Covers final adjustments for the gate and auger installation within the hopper (3.7-3.11).
Lists all replacement parts with their reference numbers and diagrams.
Provides detailed descriptions and part numbers for each replacement component.
Outlines general application guidelines for various materials like weed control, fertilizer, and salt.
Provides conversion charts for different spreader settings and materials.
General| Type | Broadcast Spreader |
|---|---|
| Material | Polyethylene |
| Wheel Size | 10 inches |
| Weight | 20 lbs |
| Wheel Type | Pneumatic |
| Application | Lawn, garden |
| Spread Width | 10 to 12 feet |
