EasyManua.ls Logo

Chapin 8000A - User Manual

Chapin 8000A
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
UNE MAUVAISE UTILISATION OU NE PAS SUIVRE LES INSTRUCTIONS PEUT
MENER À UNE DÉFAILLANCE DU PRODUIT OU À DES BLESSURES. POUR
UTILISER CE PRODUIT SANS DANGER, VOUS DEVEZ LIRE ET SUIVRE
TOUTES LES INSTRUCTIONS AVANT L’UTILISATION.
AVERTISSEMENT
SPREADERS Assembly / Operation Instructions / Parts
CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458
MODEL 8000A/8001A
Please call 800-950-4458 if you are missing any parts, having trouble assembling,
or have any questions regarding the safe operation of this product.
DO NOT RETURN TO THE STORE.
Veuillez composer le 800-950-4458 si des pièces sont manquantes, si vous avez des problèmes d’assemblage
ou des questions relativement au fonctionnement sécuritaire de ce produit.
NE PAS RAPPORTER AU MAGASIN
014663 R1016
Entreposage et entretien
Une fois l’épandage terminé, videz la trémie de tout matériel restant.
Nettoyez soigneusement l’épandeur et laissez sécher avant
d’entreposer
Pour replier la poignée :
– Desserrez les écrous à oreilles et repliez la poignée vers le bas
– Resserrez complètement les écrous à oreilles
Instructions d’assemblage
Instructions générales d’utilisation
Assurez-vous que le contrôle de vanne soit en position fermée avant
de remplir la trémie
Déterminez le réglage approprié du matériel à être utilisé en
vériant le réglage suggéré sur le sac du matériel ET/OU en vous
référant au tableau d’application sur votre panneau de contrôle de
votre épandeur (les tableaux fournis ne sont que des lignes
directrices. Assurez-vous de lire les instructions sur le sac/boîte de
matériel que vous épandez pour dénir le juste réglage dont vous
avez besoin)
Retirez les écrous à oreilles et glissez l’indicateur au réglage désiré.
Resserrez complètement les écrous à oreilles.
Pour amorcer l’épandage, commencez à marcher (à environ 5 km/h
(3 m/h)) et tirez vers vous le contrôle de la vanne pour l’ouvrir.
Pour arrêter l’épandage, poussez simplement sur le contrôle de la
vanne en position fermée.
Model 8000A
65 lb. Spreader
Model 8001A
70 lb. Spreader
Carefully Read These Instructions Before Use
Lea estas instrucciones atentamente antes de utilizarlo
lisez attentivement ces instructions avant l’utilisation
WARNING/ ADVERTENCIA/ AVERTISSEMENT
WARNING: This product contains chemicals, including lead, known to the state of California to cause birth defects and other
reproductive harm. Wash hands after handling.
ADVERTENCIA: Este producto contiene agentes químicos como plomo, que en el Estado de California es conocido por provocar
defectos congénitos y otros daños reproductivos. Lávese las manos después de usarlo.
AVERTISSEMENT : Ce produit contient des produits chimiques, incluant le plomb, reconnus par l’État de Californie comme causant
des anomalies congénitales et autres problèmes reproductifs. Se laver les mains après toute manipulation.
Enlevez les boulons et les écrous Relevez la poignée et replacez
les boulons et les écrous
Assemblage terminé

Other manuals for Chapin 8000A

Question and Answer IconNeed help?

Do you have a question about the Chapin 8000A and is the answer not in the manual?

Summary

Safety Warnings

Assembly Instructions

Follow these steps for the correct assembly of the spreader.

General Operating Instructions

Guidelines for the proper and safe operation of the spreader.

Storage and Maintenance

Instructions for storing and maintaining the spreader.

Assembly Steps

Remove Fasteners

Remove bolts and nuts as the first step in assembly.

Attach Handle

Flip handle up and re-attach bolts and nuts.

Operating Procedures

Pre-Operation Checks

Ensure the gate control is closed before filling the hopper.

Material Setting

Determine appropriate material setting via bag instructions or spreader chart.

Adjusting Gate Indicator

Slide indicator to desired setting and tighten wing nuts.

Starting and Stopping

Begin spreading by walking and pulling control; stop by pushing control.

Post-Operation Procedures

Empty Hopper

Empty any remaining material from the hopper after use.

Clean and Dry

Thoroughly clean the spreader and allow it to dry before storing.

Fold Handle

Loosen wing nuts, fold handle down, and retighten wing nuts.

Contact Information

Chapin 8000A Specifications

General IconGeneral
TypeBroadcast Spreader
Capacity80 lbs
MaterialPolyethylene
WheelsYes
Hopper MaterialPolyethylene
FrameSteel
ApplicationFertilizer, Seed, Ice Melt

Related product manuals