To Next PageTo Next Page
Need help?Do you have a question about the Chapin Pro Series and is the answer not in the manual?
Details on how to assemble and disassemble the sprayer's nozzle components.
Instructions for assembling the sprayer's wand and connecting it to the shut-off valve.
Step-by-step guide for attaching the pump handle mechanism to the sprayer.
Instructions for attaching and adjusting the shoulder straps for comfortable carrying.
Explains how to properly store the wand and pump handle when not in use.
Guidance on how to safely and correctly add liquid and chemical to the sprayer tank.
Tips for efficient pump operation, spray patterns, and pressure.
Precautions and advice for using abrasive powder-based chemicals with the sprayer.
Procedures for cleaning the sprayer after use to ensure longevity and performance.
Identifies common sprayer issues, their possible causes, and recommended solutions.
Instructions for disassembling, cleaning, and rebuilding the check valve cartridge.
Steps for replacing the plunger cup, ensuring proper alignment with the pressure chamber.
Guidance on replacing the housing gasket and felt washer for proper sealing and lubrication.
Procedures for rebuilding the check valve cartridge within the piston cylinder.
Instructions for replacing piston cylinder stud gaskets for proper sealing.
Steps to remove the handle and retaining pin from the shut-off valve.
Instructions for servicing the valve stem, spring, O-rings, and cleaning the filter.
General| Brand | Chapin |
|---|---|
| Model | Pro Series |
| Category | Paint Sprayer |
| Language | English |
