What to do if my Char-Broil Smoker has flare-ups?
Flare-ups in your Char-Broil Smoker can occur due to several reasons. First, trim excess fat from the meat before cooking. Second, adjust (lower) the cooking temperature as needed. Third, clean the smoker to remove grease build-up. Finally, ensure food build-up isn't trapping grease.
What to do if my Char-Broil Smoker trips the circuit breaker?
If your Char-Broil Smoker is tripping the circuit breaker or blowing a fuse, check for tripped household circuit breakers or GFI (Ground Fault Interrupter) and reset or replace if necessary. You can also try a known, working appliance in the outlet to rule out outlet issues. As an alternative, try a different outlet, preferably on a different circuit.
What to do if my Char-Broil Smoker won't cook properly?
If your Char-Broil Smoker is not cooking properly, ensure that the smoker door is closed during cooking. Also, preheat the smoker for 15-20 minutes and increase the controller setting.
What to do if my Char-Broil Smoker has a persistent grease fire?
If you experience a persistent grease fire in your Char-Broil Smoker, turn the smoker OFF, keep the door open, and let the fire burn out. After the smoker cools, clean the insulation bowl. Do not apply water to the fire, as personal injury may result.
How to fix unresponsive remote control on Char-Broil Smoker?
If the remote control for your Char-Broil Smoker is unresponsive, it may not be synced. To reset it: On the Main Control, press and hold the Temp button for 3 seconds until it beeps. Then, on the Remote Control, press and hold the Temp button for 3 seconds until it beeps. The remote control is now synced to the smoker.
What does ERR4 mean on my Char-Broil Smoker?
If your Char-Broil Smoker displays the error code ERR4, it indicates that the meat probe is damaged. Replace the Meat Probe.
What to do if Char-Broil Smoker has no display?
If your Char-Broil Smoker has no display, replace the Thermostat.
How to stop flare-ups in my Char-Broil Smoker?
To prevent flare-ups in your Char-Broil Smoker: * Trim excess fat from meat before cooking. * Adjust (lower) temperature as needed, if the cooking temperature is excessive. * Clean the smoker to remove grease buildup. * If grease is trapped by food buildup, turn the smoker OFF, keep the door open, and let the fire burn out. After the smoker cools, clean the insulation bowl.
What to do if my Char-Broil Smoker circuit breaker trips?
If the circuit breaker trips or a fuse blows while using your Char-Broil Smoker, check for tripped household circuit breakers or GFI (Ground Fault Interrupter) and reset or replace if necessary. Try another working appliance in the outlet to check if the outlet works. If it still trips, try a different outlet, preferably on a different circuit.
What to do if my Char-Broil Smoker remote control is unresponsive?
If the remote control for your Char-Broil Smoker is unresponsive, reset it. To reset the Remote Control: Main Control: press Temp button and hold for 3 seconds until it beeps. Remote Control: Press Temp button and hold for 3 seconds until it beeps. The Remote control is now sync’d to the smoker. indicates remote is sync’d with the smoker.
General| Brand | Char-Broil |
|---|---|
| Model | 14202005 |
| Type | Gas Grill |
| Fuel Type | Propane |
| Burners | 2 |
| Grate Material | Porcelain-coated cast iron |
| Material | Steel |
| Ignition | Piezo |
To Next Page
