To Next PageTo Next PageWhat to do if there is a grease fire on my Char-Broil Grill?
To address a grease fire or excessive flames on your Char-Broil Grill, immediately turn off the control knob and the LP cylinder valve. Allow the flames to die down completely. Once the unit has cooled, thoroughly clean any food particles and excess grease from inside the appliance body, the grease tray, and all other surfaces.
What to do if fire is coming through the control panel of my Char-Broil Grill?
If you observe fire coming through the control panel of your Char-Broil Grill, immediately turn off the control knob and the LP cylinder valve. Allow the flames to subside. After the grill is cool, remove the burner and inspect it for any blockages, such as spider nests or rust.
How to fix gas leaking from the hose of my Char-Broil 14101550 Grill?
If you detect gas leaking from the hose of your Char-Broil Grill because it's cracked, cut, or burned, immediately turn off the gas supply at the LP cylinder or the source for natural gas systems. Replace the valve/hose/regulator assembly if the hose is damaged. Refer to the instructions on performing an LP Cylinder Leak Test and Connecting the Regulator to the LP Cylinder.
What to do if gas is leaking between LP cylinder and regulator connection on my Char-Broil 14101550?
If gas is leaking between the LP cylinder and regulator connection on your Char-Broil Grill, turn off the LP cylinder valve. Then, detach the regulator from the cylinder and carefully check the rubber seal for any signs of damage. Refer to the instructions on performing an LP Cylinder Leak Test and Connecting the Regulator to the LP Cylinder.
What to do if gas is leaking from LP cylinder valve on my Char-Broil 14101550 Grill?
If gas is leaking from the LP cylinder valve of your Char-Broil Grill, turn off the LP cylinder valve immediately. Return the LP cylinder to your gas supplier.
What to do if gas is leaking from LP cylinder of my Char-Broil Grill?
If gas is leaking from the LP cylinder of your Char-Broil Grill, replace the LP cylinder.
Char-Broil 14101550 Grill igniter not working: what could be the reasons?
Several factors can prevent your Char-Broil Grill igniter from working. These include: * Gas issues: The burner might not be engaged with the control valve; there could be an obstruction in the burner; there might be no gas flow; there could be a vapor lock at the coupling nut; or the coupling nut and LP cylinder valve might not be fully connected. * Electrical issues: The electrode might be cracked or broken; the electrode tip might not be in the proper position; the wire and/or electrode might be covered with cooking residue; the wire might be loose or disconnected; or the wire might be shorting between the ignitor and electrode. To troubleshoot, check each of these potential causes.
General| Brand | Char-Broil |
|---|---|
| Model | 14101550 |
| Type | Gas Grill |
| Fuel Type | Propane |
| Burners | 3 |
| Total Cooking Area | 450 sq. in. |
| Primary Cooking Area | 360 sq. in. |
| Secondary Cooking Area | 90 sq. in. |
| BTU | 30, 000 |
| Material | Steel |
| Ignition System | Electronic Ignition |
Explains the meaning of danger and caution symbols used in the manual.
Instructions for handling gas leaks and potential fires during operation.
Guidelines for safe operation and setup in residential settings.
Information regarding chemicals in the product and health warnings.
USDA guidelines for safe meat temperatures for various types of food.
Recommendations for storing the grill when not in use to ensure safety.
Specifications and requirements for the LP gas cylinder used with the grill.
Procedure for exchanging and performing leak tests on LP cylinders.
Step-by-step guide for safely connecting the regulator to the LP cylinder.
Key safety rules to follow during operation, including placement and supervision.
Step-by-step guides for lighting the burner using the ignitor or a match.
Routine checks for flame, ignitor, valve, hose, and general cleaning advice.
Three methods described for cleaning the burner tube to ensure proper gas flow.
Details on what the warranty covers, does not cover, and limitations.
A detailed list of all parts included with the appliance.
An illustrated guide showing all parts with their corresponding numbers.
Attaching the heat shield and burner components to the main body.
Ensuring the valve is correctly connected to the burner tube.
Connecting the ignitor wire to the appliance.
Positioning the wind shield component.
Instructions for attaching and tightening the appliance legs.
Attaching the grease tray and its corresponding rails.
Installing the side handles onto the appliance body.
Connecting the control panel and heat shield components.
Securing the burner supports to the appliance.
Securing the top lid to the main appliance body.
Installing the top carrying handle.
Using alignment features for correct cooking chamber placement.
Instructions for correctly placing the cooking grate in the chamber.
How to insert the roaster basket and assemble the wire grate.
Guidance on storing cooking grates, smoker box, and wire grates on the grill.
Actions for gas leaks, fires, and excessive flames; contact fire department.
Solutions for the burner not lighting with the ignitor.
Diagnosing ignitor electrical issues and wire connections.
