Char-Broil 19609080 - User Manual

Questions and Answers

D
drojasNov 24, 2025
Why won't my Char-Broil Grill burner(s) light using the ignitor?
- N
  nicholasdixonNov 24, 2025
  There could be several reasons why your Char-Broil Grill burner(s) won't light using the ignitor. Here are some things to check: * **Gas Issues:** * Ensure the control valve is positioned inside the burner tube. * Check for obstructions in the burner tube, such as spider webs. Clean if necessary. * Make sure the gas cylinder isn't empty. * Clean the threads on the gas cylinder and regulator control valve. * Consider replacing the regulator or valve/manifold assembly if needed. * **Electrical Issues:** * Replace any cracked or broken electrodes. * Wipe the electrode and burner dry if they are wet. * Clean the wire and/or electrode with rubbing alcohol. * Reconnect any loose wires or replace the electrode/wire assembly. * Repla...
E
Elizabeth Morrow MDAug 26, 2025
How to stop flare-ups on my Char-Broil 19609080?
- D
  Dominique EspinozaAug 26, 2025
  To reduce flare-ups on your Char-Broil Grill: * Clean the burners and barbecue cooking surface. * Trim excess fat from meat before cooking. * Adjust the cooking temperature to a lower setting.
E
ejordanAug 27, 2025
Why is there a sudden drop in gas flow or low flame on my Char-Broil Grill?
- J
  James WilcoxAug 27, 2025
  A sudden drop in gas flow or low flame on your Char-Broil Grill is likely due to an empty gas cylinder. Check the gas level in the cylinder.
C
Christina RoachAug 28, 2025
What to do if my Char-Broil 19609080 Grill has a persistent grease fire?
- R
  Riley HillAug 28, 2025
  If you have a persistent grease fire on your Char-Broil Grill, turn the knobs to the OFF position and let the fire burn out. After the barbecue cools, remove and clean all the parts.
N
Nancy WilliamsAug 30, 2025
What to do if my Char-Broil Grill burner(s) will not match light?
- J
  Jonathan KnightAug 30, 2025
  If your Char-Broil Grill burner(s) will not light with a match, use a long-stem match (fireplace match).
L
Laura BennettSep 18, 2025
What to do if gas is leaking from the gas cylinder of my Char-Broil 19609080 Grill?
- K
  Karen HawkinsSep 18, 2025
  If gas is leaking from the gas cylinder of your Char-Broil Grill, replace the gas cylinder.
E
Eduardo MarquezSep 16, 2025
What to do if there is fire coming below the control panel of my Char-Broil Grill?
- R
  roywellsSep 16, 2025
  If you see fire coming from below the control panel of your Char-Broil Grill, turn off the control knobs and gas cylinder valve. After the fire is out and the barbecue is cold, remove the burner and inspect it for spider nests or rust.
R
Richard EvansSep 18, 2025
What to do if there is fire coming through at the burner control valve connection of my Char-Broil Grill?
- A
  Ashley KimSep 18, 2025
  If you see fire coming through the burner control valve connection on your Char-Broil Grill, turn off the control knob. After the fire is out and the barbecue is cold, remove the burner and inspect it for spider nests or rust.
B
Brittany AlvaradoSep 8, 2025
Why is fire coming through the burner control valve connection on my Char-Broil 19609080?
- A
  Alyssa JonesSep 8, 2025
  If you see fire coming through at the burner control valve connection on your Char-Broil Grill, it's because of a fire in the burner tube section due to a blockage. Turn off the control knob. After the fire is out and the barbecue is cold, remove the burner and inspect it for spider nests or rust.
A
April HerreraSep 5, 2025
Why is there fire coming below the control panel of my Char-Broil 19609080 Grill?
- D
  Drew WolfeSep 6, 2025
  If there's fire coming from below the control panel of your Char-Broil Grill, it indicates a fire in the burner tube section due to a blockage. Immediately turn off the control knobs and gas cylinder valve. Once the barbecue is cold, remove the burner and check for spider nests or rust.