EasyManua.ls Logo

Char-Broil 15202032 - User Manual

Char-Broil 15202032
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
VERTICAL GAS
SMOKER 600
11/07/14 • 42804875
If you have questions or need assistance
during assembly, please call 1-800-241-7548
Si tiene alguna pregunta o si Necesita
ayuda durante el Ensamblado, llámenos Al
1-800-241-7548
Serial number | Número de serie
Date purchased | Fecha de compra
See rating Label on unit for serial number.
El número de serie se encuentra en la etiqueta de
especificaciones de la unidad.
15202032
Tools Required for Assembly:
#2 Phillips or Standard Flat blade Screwdriver (Not Provided)
Small Adjustable Wrench (Not Provided)
7/16” Combination Wrench (Not Provided)
Herramientas necesarias para el armado:
Destornillador No. 2, Philips o de hoja plana (que no viene incluido)
Llave inglesa pequeña (que no viene incluida)
Llave mixta de 7/16" (que no viene incluida)

Table of Contents

Questions and Answers

  • K
    Kevin RayNov 1, 2025
    Why won't my Char-Broil Grill burner light with the ignitor?
    • J
      Joshua ShortNov 1, 2025
      If the burner on your Char-Broil Grill won't light with the ignitor, several factors could be at play. Start by checking the burner's alignment with the control valve, ensuring it's correctly positioned. Obstructions in the burner, such as spider webs, can also prevent ignition, so inspect and clean the burner if necessary. Ensure that the LP cylinder isn't empty and that the coupling nut and LP cylinder valve are fully connected, tightened by hand. For electrical issues, inspect the electrode for cracks or breaks, and replace it if needed. Make sure the electrode tip is properly positioned, pointing towards the gas port opening on the burner at a distance of 1/8” to 1/4”, adjusting as necessary. Clean any cooking residue from the wire or electrode using rubbing alcohol. Check for loose or...
  • M
    Mr. Kristopher MurphyNov 10, 2025
    What to do if my Char-Broil Grill burner won't light with the ignitor?
    • E
      Erin WebbNov 10, 2025
      If the burner of your Char-Broil Grill doesn't ignite using the ignitor, it could be due to a few reasons related to gas or electrical issues. First, ensure the burner is correctly engaged with the control valve. Next, check for any obstructions in the burner, like spider webs; if there are any, clean them. Also, verify that your LP cylinder isn't empty. Make sure that the coupling nut and LP cylinder valve are fully connected, tightened by hand. On the electrical side, look for cracks or breaks in the electrode and replace it if damaged. Ensure the electrode tip is properly positioned towards the gas port opening on the burner, about 1/8” to 1/4” away, and adjust if needed. Clean any cooking residue from the wire or electrode using rubbing alcohol. Check if the wire is loose or disconnect...
  • J
    Jeffrey YoderNov 21, 2025
    How to fix Char-Broil 15202032 burner that won't light with ignitor?
    • C
      Courtney GomezNov 21, 2025
      There are several potential causes if the burner on your Char-Broil Grill fails to light when using the ignitor. Start by verifying that the burner is correctly engaged with the control valve. Check for obstructions within the burner, such as spider webs, and clean if needed. Confirm that the LP cylinder has gas. Ensure the coupling nut and LP cylinder valve are fully connected, tightened by hand. Inspect the electrode for any cracks or damage and replace it if necessary. The electrode tip should be pointing towards the gas port opening on the burner, positioned 1/8” to 1/4” away; adjust if needed. Clean the wire or electrode if covered with cooking residue, using rubbing alcohol. Check for loose or disconnected wires and reconnect or replace the assembly. If the wire is shorting between t...

Summary

Product Introduction

Tools Required for Assembly

Lists necessary tools for product assembly.

Safety Warnings and Symbols

Safety Symbols Guide

Explains the meaning of various safety symbols used in the manual.

General Appliance Safety Warnings

Provides critical warnings for safe operation and placement of the appliance.

Installation and Storage Precautions

Installation Safety Guidelines

Details safety requirements for installing the gas appliance according to codes.

Appliance Storage and Grease Fire Prevention

Advises on proper storage and managing grease fires during cooking.

Food Safety and Appliance Use

Food Safety Practices

Outlines essential steps for safe food handling and cooking.

Appliance Use Dangers and Precautions

Highlights critical dangers related to LP cylinder proximity and general use.

LP Gas System Management

LP Cylinder Specifications and Leak Testing

Details required cylinder specs and the procedure for testing gas leaks.

LP Gas Connection and Testing

Connecting Regulator and Leak Testing

Guides on connecting the gas regulator and performing leak tests.

Appliance Safe Usage Environment and Tips

Safe Usage Environment and Tips

Specifies safe operating locations, clearances, and essential usage tips.

Appliance Operation and Cleaning

Ignition, Burner Operation, and Cleaning

Guides on lighting, checking the burner, and general cleaning procedures.

Burner Assembly Maintenance

Cleaning the Burner Assembly

Provides instructions for cleaning the burner assembly to ensure proper function.

Cooking Setup and Preparation

Using Wood Chips and Water Pan

Explains preparing wood chips and using the water pan for smoking.

Product Warranty

Limited Warranty Details

Outlines the terms, coverage, and limitations of the product warranty.

Parts Identification

Parts Diagram

Visual representation of all components of the appliance.

Parts List

Component Descriptions

A detailed list of all parts with their corresponding keys and quantities.

Assembly Instructions

Step 1: Prepare Smoker Chamber

Instructions for removing the door and placing the smoker chamber.

Step 2: Install Burner Housing

Guides on attaching the burner housing to the smoker chamber.

Step 3: Attach Control Panel

Details on mounting the control panel assembly to the smoker chamber.

Step 4: Install Ignitor Wire

Instructions for routing and connecting the ignitor wire to the ignitor.

Step 5: Install Legs

Steps for attaching the legs to the smoker body using bolts.

Step 6: Stand Unit Upright

Guidance on safely standing the assembled unit upright with assistance.

Step 7: Install Air Damper

Procedures for installing the air damper at the top of the smoker.

Step 8: Attach Side Handles

Instructions for installing the side handles onto the smoker body.

Step 9: Insert Water Pan and Grates

Guides on placing the water pan and cooking grates inside the smoker.

Steps 10 & 11: Final Assembly

Instructions for attaching the door and temperature gauge.

Troubleshooting and Emergencies

Emergency Gas Leak Procedures

Critical steps to take in case of a gas leak emergency.

Burner Ignition Troubleshooting

Addresses issues related to the burner not lighting with the ignitor.

Troubleshooting (Continued)

Flame and Gas Flow Issues

Solves problems related to flame blowouts, flare-ups, and reduced gas flow.

Product Registration

Registering Your Product

Information on how to register the product for warranty and updates.

Char-Broil 15202032 Specifications

General IconGeneral
BrandChar-Broil
Model15202032
CategoryGrill
LanguageEnglish

Related product manuals