To Next PageTo Next PageWhy won't the burner light with the ignitor on my Char-Broil Grill?
If the burner on your Char-Broil Grill won't light using the ignitor, start by replacing the battery with a new alkaline one. If that doesn't work, check if the wires are loose or disconnected and reconnect them, or replace the electrode/wire assembly. Also, inspect the electrode for cracks or breaks, and replace it if necessary.
What to do if my Char-Broil Grill burner won't light with the ignitor?
If the burner on your Char-Broil Grill won't light using the ignitor, there might be no gas flow. First, check if the LP cylinder is empty. If it's not empty, it is recommended to refer to information about a sudden drop in gas flow. Also, ensure that the coupling nut and LP cylinder valve are fully connected; tighten it by hand until you reach a solid stop, but do not use tools.
How to fix a Char-Broil Grill when the burner won't light with the ignitor?
If the burner on your Char-Broil Grill won't light using the ignitor, ensure the burner is correctly engaged with the control valve by checking that the valves are positioned inside the burner tubes. Also, make sure the burner tubes are free from obstructions like spider webs. Refer to the cleaning section for instructions.
Why is the ignitor not lighting my Char-Broil Grill burner?
If the burner on your Char-Broil Grill won't light using the ignitor, the electrode tip might not be in the correct position. The tip of the electrode should point toward the gas port opening on the burner, with a distance of 1/8” to 1/4”. Adjust as needed. Also, clean any cooking residue from the wire or electrode using rubbing alcohol and a clean swab.
How to troubleshoot ignitor problems on a Char-Broil Grill?
If the burner on your Char-Broil Grill won't light using the ignitor, you may be trying to light the wrong burner. Refer to the instructions on the control panel. Also, there may be a vapor lock at the coupling nut to the LP cylinder. To resolve this, turn off the knobs, disconnect the coupling nut from the LP cylinder, then reconnect and try again.
What causes the ignitor to fail on a Char-Broil Grill?
If the burner on your Char-Broil Grill won't light using the ignitor, the wires might be shorting (sparking) between the ignitor and electrode. In this case, replace the ignitor wire/electrode assembly.
General| Brand | Char-Broil |
|---|---|
| Model | T-22D 466270612 |
| Category | Grill |
| Language | English |
Indicates an imminently hazardous situation resulting in death or serious injury if not avoided.
Indicates a potentially hazardous situation resulting in death or serious injury if not avoided.
Indicates a potentially hazardous situation resulting in minor or moderate injury if not avoided.
Warns about chemicals known to cause cancer, birth defects, and reproductive harm.
Warns against altering or repairing the hose/valve/regulator assembly.
Caution regarding exceeding the weight limit of the side shelf.
Never store spare LP cylinders under or near the appliance or in an enclosed area.
Instructions for safely removing, transporting, and storing LP cylinders.
Details required specifications and features for LP cylinders.
Explains LP gas characteristics and safe filling procedures.
Procedures for exchanging cylinders and performing leak tests for safety.
Step-by-step guide for connecting the regulator to the LP cylinder valve.
Detailed steps for testing the integrity of the gas system connections.
Essential safety tips for operating the grill to prevent injury and fire.
Specific safety requirements for using grills in apartment complexes.
Instructions on how to safely light the grill's ignitor system.
Alternative methods for lighting burners, including sideburner.
How to check burner flames and turn the grill off safely.
Guidelines for checking components and cleaning the grill surfaces.
Explains how spiders and insects can obstruct grill venturi tubes, causing issues.
Instructions to prevent flashbacks by cleaning venturi tubes and burner assemblies.
Guidelines for storing the grill, including cylinder connection and location.
Instructions for cleaning or replacing burner parts, especially if igniting is difficult.
Details the coverage scope, duration, and types of failures covered by the warranty.
Lists items not covered by warranty and disclaimers for implied warranties.
States limitations on manufacturer's liability and consumer rights.
Lists key components with their corresponding quantities and descriptions.
Lists parts that are not visually depicted in the main diagram.
Visual representation of all grill parts with corresponding labels.
Step-by-step guide for installing casters onto the bottom shelf.
Instructions for securing side panels to the bottom shelf using screws and washers.
Instructions for safely lifting and positioning the grill head onto the cart assembly.
Securing the upper back panel to the grill cart structure.
Steps for installing the temperature gauge and reattaching control knobs.
How to attach the side fascia panels to the side shelves.
Guide for attaching the foldable side shelf brackets and shelves.
Instructions for attaching main side shelves and their fascia panels.
Securing the front brace and installing grease tray rails.
Attaching the door and connecting the electronic ignition module.
Placing flame tamers, cooking grates, and warming rack.
Inserting the grease tray and installing the battery for the ignitor.
Instructions for installing the LP cylinder into the grill cart.
Addresses emergencies like gas leaks from hoses, cylinders, or fires.
Solutions for burners not lighting with ignitor or match.
Troubleshooting for spark module, connections, and battery problems.
Addresses low flame, blowouts, flare-ups, and grease fires.
Solutions for burner obstructions, flashbacks, and LP cylinder filling issues.
Troubleshooting for the AUTO-CLEAN™ timer and LED indicators.
Detailed breakdown of electronic ignition issues by section (I, II, III).
Instructions and link for registering the product online for offers and warranty.
Details for filling out and mailing the physical warranty registration card.
