Char-Broil T-47D 463251913 User Manual

IMPORTANT: Refer t o the
instructions inside when
co nv er ti ng th is gr il l to
Natural Gas.
Assembly instructions © 2013
PRODUCT GUIDE
MODEL 463251913
© 2013 Char-Broil, LLC Columbus, GA 31902
Printed in China
Serial Number
Date Purchased
IMPORTANT: Fill out the product record information below.
See rating label on grill for serial number.
For support and to register your
grill, please visit us at
www.charbroil.com
If you have questions or need
assistance during assembly,
please call 1-888-430-7870.
T-47D
09/12/13 • G521-001-040801

Char-Broil T-47D 463251913 Specifications

General

Type	Gas Grill
Fuel Type	Propane
Number of Burners	4
Material	Stainless Steel
Burner Material	Stainless Steel
Cooking Surface Area	470 sq. in.
BTU Output	12000 per burner
Ignition Type	Electronic

Summary

Use and Care: LP Cylinder Safety

LP Cylinder Specifications and Requirements

Details on LP cylinder specifications, handling, and safety.

LP Cylinder Filling Procedures

Instructions and precautions for safely filling LP cylinders.

LP Cylinder Exchange and Leak Test

Leak Testing Valves, Hose, and Regulator

Grill Assembly: Casters and Side Panels

Step 1: Attach Casters to Bottom Shelf

Instructions for securing casters to the bottom shelf for mobility.

Step 2: Attach Side Panels to Bottom Shelf

Securing side panels to the bottom shelf, noting panel orientation.

Grill Assembly: Lower Back Panel Installation

Grill Assembly: Center Divider Installation

Step 4: Attach Center Cart Divider

Securing the center cart divider to the bottom shelf.

Step 5: Secure Center Cart Divider to Lower Back Panel

Attaching the center cart divider to the rear panel.

Grill Assembly: Shelf and Back Panel Attachment

Step 6: Attach Cabinet Shelf

Securing the cabinet shelf to the side panel and center divider.

Step 7: Attach Upper Back Panel

Grill Assembly: Front Brace and Heat Shield

Step 8: Insert Front Brace

Step 9: Attach Tank Heat Shield Tabs

Grill Assembly: Positioning Grill Head and Securing Panels

Step 10: Position Grill Head onto Cart

Two-person step to carefully lower and align the grill head onto the cart.

Step 11: Secure Front Brace and Upper Back Panel

Grill Assembly: Ignition Module and Right Shelf Components

Step 12: Connect Ignition Wires

Step 13: Attach Right Side Fascia and Shelf

Grill Assembly: Right Side Shelf Completion

Grill Assembly: Left Side Components

Grill Assembly: Sideburner Installation

Step 16: Install Sideburner Valve Bracket and Bezel

Step 17: Insert Sideburner and Connect Ignitor Wire

Grill Assembly: Side Burner Lid Attachment

Grill Assembly: Grate and Door Installation

Step 19: Place Side Burner Cooking Grate

Step 20: Install Doors

Grill Assembly: Small Doors and Troughs

Step 21: Attach Small Doors

Step 22: Place Troughs

Grill Assembly: Final Components

Step 23: Place Cooking Grates and Warming Rack

Step 24: Install LP Cylinder

Placing and securing the LP cylinder into the cart, connecting regulator.

Main Burner Conversion to Natural Gas

Sideburner Conversion to Natural Gas

Outdoor Stove & Griddle Conversion

Natural Gas Hose Connection

Connecting Grill to Natural Gas Source

Troubleshooting: Burner Ignition and Gas Flow

Troubleshooting: Flame, Fire, and Cylinder Issues

Troubleshooting: Electronic Ignition System