Char-Griller 2137 - Attaching Damper Circle; Attaching Side Shelf

OM2137 B.2 ™ & © Char-Griller / A&J Mfg. 9
13. Attach the DAMPER CIRCLE from the inside of bottom half of grill body with a
3/4" Bolt. The bolt goes thru a Flat Washer, thru the Damper Circle, thru the
Grill Body, thru another Flat Washer, thru a Lock Washer, and finally attached to
a Hex Nut. The small tab on the Damper Circle should protrude outward. Fig. J.
14. Attach SIDE SHELF to the four (4) holes on left side of grill with 1/2" hex bolts
and nuts. See below.
Hex Nuts
Hex Bolts
Side Shelf
Inside of
Charcoal
Grill Body