Do you have a question about the Charnwood Aire 3 and is the answer not in the manual?
Manufacturer | Charnwood |
---|---|
Model | Aire 3 |
Category | Stove |
Fuel Type | Wood |
Flue Diameter | 125mm |
Defra Approved | Yes |
Diagram and explanation of stove air controls for airflow adjustment.
Instructions for cleaning the stove's glass, baffle, and flue.
Steps for lighting the stove and controlling the fire with air controls.
Details on suitable and unsuitable fuels for the Charnwood Aire stove.
Step-by-step guide for lighting the stove, including initial smoke and ventilation.
Guidance on using the air control to manage burn rate and output.
Instructions on how to refuel the stove safely and avoid smoke.
Procedures for safely removing ash from the stove.
Guidelines for burning fuel at a reduced rate for efficiency.
General maintenance including cleaning glass, door seals, and servicing.
How to clean the baffle and flue to prevent fume emission.
Recommendations for sweeping the flue to maintain safety and performance.
Common issues like fire not burning and blackening door glass with solutions.
Tips to prevent and address blackening of the stove's glass door.
Warning and immediate actions for persistent fume emission from the appliance.
Checks to perform if the stove fire is blazing uncontrollably.
Actions to take if a fire occurs in the flue.
Contact information for further assistance with the Charnwood stove.
Steps for safely unpacking and preparing the stove for installation.
Essential safety measures and requirements for installing the stove.
Technical specifications including fuel, heat output, and efficiency.
Requirements and considerations for the flue system installation.
Guidelines for hearth and fire surround materials and clearances.
How to connect the stove to the flue pipe for different models.
Final checks before lighting the stove after installation.
Steps for commissioning the stove after installation and first firing.
Information about the optional cooking plate attachment.
Minimum clearances for parallel installation of Aire 3 and Aire 7 stoves.
Minimum clearances for corner installation of Aire 3 and Aire 7 stoves.
Required hearth dimensions for Aire 3 models in default, to wall, and rear flue configurations.
Required hearth dimensions for Aire 7 models in default, to wall, and rear flue configurations.
Specifications for non-combustible material used for hearths.
Minimum dimensions for corner hearths for Aire 3 stoves with different flue options.
Minimum dimensions for corner hearths for Aire 7 stoves with different flue options.
Specifications for non-combustible material for corner hearths.
Detailed measurements for the Aire 3 stove with a store stand, including front, side, and rear views.
Detailed measurements for the Aire 3 stove in the low configuration, including front, side, and rear views.
Detailed measurements for the Aire 7 stove with a store stand, including front, side, and rear views.
Detailed measurements for the Aire 7 stove in the low configuration, including front, side, and rear views.
List of spare parts for the Aire 3 Low model with part numbers.
List of spare parts for the Aire 3 Store Stand model with part numbers.
List of spare parts for the Aire 7 Low model with part numbers.
List of spare parts for the Aire 7 Store Stand model with part numbers.
Diagram illustrating minimum flue system exit height requirements from AS/NZS 2918:2018.
Diagram detailing the components and installation of a standard triple skin flue kit.
Diagram showing the installation of an insulated room seal standard flue kit.
Diagram detailing the installation of an insulated room seal fully sealed flue kit.
Diagram illustrating the installation of an insulated room seal rear flue kit.
Compliance data and testing information for the Aire 3 model, including heat output and emissions.
Compliance data and testing information for the Aire 7 model, including heat output and emissions.
Details of the 10-year warranty, including terms, conditions, exclusions, and limitations.