To Next Page
E
elizabethjonesSep 14, 2025
Why can't I delete a factory sequence on my Chattanooga Medical Equipment?
- CChristopher RileySep 14, 2025
Factory sequences, which have names that begin with an asterisk (*), cannot be deleted.
Why can't I delete a factory sequence on my Chattanooga Medical Equipment?
Factory sequences, which have names that begin with an asterisk (*), cannot be deleted.
What to do if the laser application is out of calibration in Chattanooga Medical Equipment?
If the laser application is out of calibration: 1. Discontinue using the laser applicator and contact the dealer or factory for technical service to have it recalibrated. 2. If the problem exists with multiple laser applicators, stop using the laser and contact the dealer or factory for technical service.
What to do if I entered the incorrect Laser PIN on Chattanooga Medical Equipment?
If you entered the incorrect Laser PIN, enter the correct laser PIN when prompted prior to starting a laser treatment.
What to do if I attempt to perform an action requiring the USB flash drive, but no USB flash drive is plugged into the Chattanooga Medical Equipment?
If you're attempting an action needing a USB flash drive and none is plugged in, or it cannot be accessed, ensure a valid USB flash drive is firmly inserted into the unit. Alternatively, try a different USB flash drive.
What to do if I attempt to perform an action requiring a particular file on the USB flash drive, but the file does not exist on the Chattanooga Medical Equipment?
If you're attempting an action requiring a specific file on the USB flash drive, but the file doesn't exist, make sure the USB flash drive contains the correct file for the desired function. Also, ensure a valid USB flash drive is firmly inserted into the unit, or try a different USB flash drive.
What to do if I attempt to save the Clinic Name with a blank name on Chattanooga Medical Equipment?
If you're attempting to save the Clinic Name with a blank name, make sure the Clinic name is not blank before saving it.
What to do if I attempt to save a Custom protocol with a blank protocol name on Chattanooga Medical Equipment?
If you're trying to save a Custom protocol with a blank protocol name, make sure the protocol name is not blank before saving it.
What to do if I attempt to save a Sequence with a blank sequence name on Chattanooga Medical Equipment?
If you're trying to save a Sequence with a blank sequence name, make sure the sequence name is not blank before saving the sequence.
What to do if I attempt to select an sEMG treatment but no sEMG is installed on the Stim 1/2 module on Chattanooga Medical Equipment?
If you're trying to select an sEMG treatment but no sEMG is installed on the Stim 1/2 module: 1. If sEMG is installed on the Stim 1/2 module, reset the Therapy System by turning it Off then back On via the Power button. 2. If sEMG is installed on the Stim 1/2 module and the problem persists, discontinue use of the device and contact the dealer or factory for technical service.
What to do if no laser applicator is plugged into the Chattanooga Medical Equipment unit?
If no laser applicator is plugged into the unit, ensure the desired laser applicator is securely connected to the unit prior to selecting a laser treatment.
General| Brand | Chattanooga |
|---|---|
| Model | Vectra Neo |
| Category | Medical Equipment |
| Language | English |
Explains safety symbols and their meanings used throughout the manual.
Defines terms and explains software icons for system operation and control functionality.
Details device markings and lists intended uses for electrotherapy, sEMG, and laser.
Overview of the Vectra® Neo Clinical Therapy System's modular design and components.
Details the front, rear, and side controls and their functions on the system.
General cautions for safe operation and maintenance to prevent minor injury or damage.
General warnings for safe operation and maintenance to prevent serious injury or damage.
High-risk safety warnings and potential hazards that could result in death or serious injury.
Instructions for assembling the therapy system head to the cart.
Steps for attaching and adjusting the cart legs for height.
Guide for installing therapy modules and steps for system start-up.
Provides physical measurements and electrical specifications for the system.
Details technical specifications for ultrasound and laser modalities.
Information on required protective eyewear for laser use.
Guidelines for proper electrode application for electrotherapy.
Instructions for preparing patients for sEMG and stimulation therapies.
Steps for preparing the patient's skin for laser and ultrasound therapy.
Explains the layout of the system's interface and the home screen.
Details user preferences, system settings, and treatment screen elements.
Guides for operating electrotherapy, ultrasound, and combination therapies.
Guides for sEMG, laser operation, and saving data to USB.
Lists error codes, probable causes, and remedies for system issues.
Information on ordering replacement parts and accessories.
Lists specific accessories for laser and ultrasound therapies.
Instructions for cleaning the Vectra® Neo Clinical Therapy System.
Details required calibration procedures for ultrasound and laser applicators.
Procedures for obtaining service and warranty claims.
Details the product warranty terms and conditions.
Explains laser therapy principles, treatment tips, and defines common terms.
Information regarding EMC compliance and guidelines for medical devices.
Provides formulas for output current and guides for electrode size selection.
