Chauvet Bubble King - 4. Operation; Operating the Bubble King; AC-W Wireless Controller

Page 8 of 11 Bubble King™ User Manual (Rev. 3)
4. OPERATION
Operation
1. Place the Bubble King™
on a level surface and loosen the thumbscrews on the front
of the unit for fluid tank access. Lift the cover.
2. Fill the tank with bubble fluid.
Note: We recommend using CHAUVET® bubble fluid (BJU) which
has been
specially formulated for use with CHAUVET® Bubble Kings.
The tank capacity
is 56 oz. (1.7 l).
3. Lower the cover and tighten screws.
4. Plug into a suitable wall outlet.
5.
Turn on the unit. For remote use, move the switch to Remote and use the optional
remote controller to operate the Bubble King™.
Note: Do not leave unused fluid in the reservoir for an extended period. The
fluid may thicken in the reservoir.
AC-W wireless controller is now available for use with the
Bubble King™. The AC-W is a wireless trigger that does not need
an external power supply — easy setup and easy teardown.
In addition, the AC-W has an operation range of 100 ft
(unobstructed) for increased flexibility enabling
the attached
machines to be triggered from almost anywhere.