Bubble King™ User Manual (Rev. 3) Page 9 of 11
5. TECHNICAL INFORMATION
Maintenance
Dust build up reduces output performance and can cause overheating. This can lead to
reduction of the product’s life and mechanical wear.
To maintain optimum performance
and minimize wear, you should clean your products frequently.
usage and environmental conditions could be contributing factors
cleaning frequency.
After every 40 hours of continuous operation or when the machine will be idle for a long
time it is recommended to rinse the bubble
wands and fluid tank with warm water to
prevent a build-up of residue which could reduce performance.
To clean the product, follow the instructions below:
• While the unit is unplugged, loosen the thumbscrew and lift cover to reveal the fluid
tank.
• Empty all bubble fluid from the tank and replace with warm water.
• Plug the product in and allow it to run as usual until all wands appear to be free of
residue.
Always dry the surfaces carefully after cleaning them.
Do not spin the fan using compressed air because you could damage it.
To Next Page