CHCNAV HCE320 - Data Controller Function

To Next Page

To Previous Page

HCE320 Data Controller Manual

3.4 Data Controller Function

Enter the

[Settings],

find

[Location],

choose one positioning mode and

open it;

Open LandStar7 software, tap

[

Connect

] in the [Configure],

choose

[Local] in the [Device Type], [Android Local] in the [Device Name],

[Local] in the [Connection Type], tap [Connect]. It can be used to

measure when the connection is successful.

Note: Must enlarge tolerance and untick [Fixed solution] in the

measurement because the precision of handheld controller is meter-

level.