Check Point 2200 Installing And Removing

Classification [Protected] P/N:706515
© 2015 Check Point Software Technologies Ltd. All rights reserved.
For a list of our trademarks, please refer to: www.checkpoint.com/copyright.html.
For a list of our Third Party Copyright notices, please refer to: www.checkpoint.com/3rd_party_copyright.html
Check Point 2200 and 2200B
Installing and Removing Memory
706515
Protected
2015
Important - We recommend that only experienced personnel install
or remove hardware components. Installing or removing
components incorrectly can permanently damage the appliance.
Preparing the Appliance
Before you start to install or remove memory DIMMs, make sure that:
 You can connect to the WebUI or CLI to shut down the appliance.
 The appliance is in a clean environment and on a level surface.
 You can physically access and open the cover of the appliance.
 You have the Check Point memory DIMM upgrade kit.
Important - To protect the appliance and the memory modules
from electrostatic discharge damage, make sure that you are
properly grounded before you touch these components. Read the
Health and Safety Information in the Check Point 2200 Appliances
Getting Started Guide before you start to prepare the appliance.
We recommend that you use the grounding wrist strap that is
included in the upgrade kit.

Check Point 2200 Specifications

General

Brand	Check Point
Model	2200
Category	Firewall
Language	English