Check Point 4000 Appliances Installing And Removing Appliances Installing And Removing Memorymemory

Classification [Protected] P/N:707205
© 2017 Check Point Software Technologies Ltd. All rights reserved.
For a list of our trademarks, please refer to: www.checkpoint.com/copyright.html.
For a list of our Third Party Copyright notices, please refer to: www.checkpoint.com/3rd_party_copyright.html
Check Point 4000 and TE250
Appliances Installing and Removing
Memory
707205
Protected
2017
Important - We recommend that only experienced personnel install or
remove hardware components. Installing or removing components
incorrectly can permanently damage the appliance.
Preparing the Appliance
Before you start to install or remove memory DIMMs, make sure that:
• You can connect to the WebUI or CLI to shut down the appliance.
• The appliance is in a clean environment and on a level surface.
• You can physically access and open the cover of the appliance.
• You have the Check Point memory DIMM upgrade kit.

Check Point 4000 Specifications

General

Brand	Check Point
Model	4000
Category	Firewall
Language	English