Check Point 4800 - Replacing Manual

.
P/N: 704783 | P. 1
© 2011 Check Point Software Technologies Ltd. All rights reserved.
For a list of our trademarks, please refer to: http://www.checkpoint.com/copyright.html.
For a list of our Third Party Copyright notices, please refer to: http://www.checkpoint.com/3rd_party_copyright.html.
Replacing Check Point 4800
Power Supply
Important - Make certain that you are electromagnetically grounded when
performing the following procedures. Static electricity can damage the appliance.
Item
Description
1
Power supply unit
2
Extraction handle
3
Release lever
4
Power cord socket
5
Power switch