Check Point 4800 Mounting Instructions

Classification [Protected] P/N:706924
© 2016 Check Point Software Technologies Ltd. All rights reserved.
For a list of our trademarks, please refer to: www.checkpoint.com/copyright.html.
For a list of our Third Party Copyright notices, please refer to: www.checkpoint.com/3rd_party_copyright.html
Rack Mounting for Check Point
Appliances
706924
Protected
2016
Check Point appliances are mounted in racks with either fixed rails or sliding
rails depending on the appliance model.
These Check Point appliances come equipped by default with fixed rails:
• 4200, 4400, 4600
• TE250
Alternatively, you can choose to install them with sliding rails (as an optional
accessory).
The sliding rails are certified by Check Point to be used with these Check Point
appliance models:
• 4200, 4400, 4600, 48
00
• 12
200, 12400, 126
00
• T
E250, TE1000
• TE250X, TE1000X, TE2000X

Check Point 4800 Specifications

General

Form Factor	1U
IPS Throughput	5 Gbps
Maximum VPN Tunnels	10, 000
Interfaces	8 x 1 GbE, 4 x 10 GbE SFP+
Power Supply	Dual