Check Point QUANTUM SPARK 1500 - To create a network object of type IP Range; To create a network object of type Network; To create a network object of type Domain Name

Managing Network Objects
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|293
To create a network object of type IP Range:
1. Click New.
The New Network Object window opens.
2. In Type, select IP Range.
3. In the Start IP and End IP fields, enter the IP addresses that represent the start of the IP range and
end of the IP range.
4. In Object name, enter the applicable text.
5. Select or clear this option as necessary:
Exclude from DHCP service - The internal DHCP service does not distribute the configured IP range
to anyone.
6. Click Apply
Note - Wildcard network objects that represent a series of non-sequential IPaddresses are supported.
To create a network object of type Network:
1. Click New.
The New Network Object window opens.
2. In Type, select Network.
3. In Network address, enter the IP address.
4. In Subnet mask, enter the subnet mask.
5. In Object name, enter the applicable text.
6. Click Apply
To create a network object of type Domain Name:
1. Click New.
The New Network Object window opens.
2. In Type, select Domain Name.
3. Enter the Domain (an FQDN).
4. Enter the Object name.
5. Click Apply