EasyManua.ls Logo

Chef CFE532WA - Cleaning the Cooker

Chef CFE532WA
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Oven
•
WARNING
Do not remove the oven door
• Makesureovenknobsareintheoffposition
Cleanimmediatelyafteruseasawarmoveniseasiertoclean
• Usedetergent,hotwater(andhouseholdammonia/
cloudy ammonia if necessary) and a soft cloth. Dry thoroughly.
• Removeshelveswhencleaningoven
• Ifthereisabuild-upofgrease,placeasmallovenproof
dish containing ¼ cup (62mL) household ammonia/cloudy
ammonia and ¾ cup (187mL) water in the oven. Heat
oven to 110 degrees and turn oven off when 110 degrees
is reached. Leave over-night. The fumes will loosen stubborn
grease and stains. Remove bowl, wash with hot, soapy
water and dry well before closing oven door again.
Oven Shelves
• Chromeshelves:usedetergentandhotwater.Ifvery
dirty use a non-abrasive nylon scourer
• Enameldishesandtray:usedetergentandhotwater.
If very dirty a non-abrasive nylon scourer
• DONOTcleanovenpartswithabrasiveor
caustic-type cleaners.
Oven – Grill Dish and Insert
• Aftereveryuse,andwhilestillwarm,sprinklegrillinsert
with detergent and cover with wet paper towel as this will
loosen food particles and grease
• Washpanandgridwithhot,soapywaterwithalittle
household ammonia/cloudy ammonia added. Rinse and
dry before replacing in position.
Ceramic Hotplates
• Cleanwithdetergentandhotwaterandpolishwith
a soft cloth
• Forhardertocleanspillsabladescraperissupplied
• Aluminiumfoil,plasticandhighsugarcontentfoodcan
cause pitting if not removed before the hotplate has cooled.
cleaning the cooker
Chef 540 Upright Cooker CLEANING THE COOKER 11
Solid Hotplates
• Solidhotplatesarettedwithstainlesssteeltrimrings,
which after initial use, change colour to light brown.
This is a normal characteristic of stainless steel and will
not affect the operation or performance of your hotplates
• Cleanoffanyspillageafterhotplatehascooleddown
• Atregularintervals,cleanhotplatewithanylonscouring
pad and soapy water. Wipe clean then warm hotplate
for 30 seconds to dry the surface
• Apply‘hotplateprotector’’.Sethotplateonhighfor3
minutes to allow coating to harden.
Gas Burners
• Flameportblockagesshouldberemovedwithasmall
metal cake skewer or nylon brush.
• Cleandirtysparkplugsverygentlywithanylonscourer.
DO NOT use steel wool. DO NOT bend spark plug as
it may break.

Related product manuals