Chevin Research A5000 - Mono Bridge Loadings and Warranty; Mono Bridge Loading Chart; Product Warranty and Service

Warranty
This precision engineered CHEVIN product is guaranteed against defects due to faulty materials and
workmanship for a period of twenty four (24) months from the date of the original purchase, subject to
the following restrictions:
• This warranty is only valid in the country of purchase
• The equipment has not been abused or operated in conjunction with unsuitable or faulty apparatus.
The equipment has not been disassembled, modied or tampered with by any person other than our
CHEVIN staff or overseas by our own or distributors’ staff.
• The equipment has not suffered damage in transit.
Should service be required, notify the dealer from whom you purchased the equipment to arrange for an
authorised CHEVIN agent to conrm the need for attention.
• Do not dispatch the goods without the prior approval of CHEVIN or its authorised agents. If asked to
return the goods, pack them carefully (preferably in the original carton) and return pre-paid. Insurance
is recommended as goods are returned at owner’s risk.
• Packing insurance and freight on the return journey will be paid for by CHEVIN or its authorised agents
only if warranty work proves necessary. If warranty work proves unnecessary, goods will be released
upon payment by the owner for charges for non-warranty repair work and return packing, insurance
and freight.
• The attached warranty card should be completed and returned to CHEVIN RESEARCH LTD.
• Failure to register by not returning the warranty card in no way limits or invalidates the warranty, but
in the event of service being required, delay may result since warranty work cannot begin until the
original sale has been veried.
• In case of difculty, contact CHEVIN RESEARCH LTD. This warranty in no way affects your statutory
rights.
Chevin Research Ltd., 41a Ilkley Road, Otley, West Yorkshire LS21 3LP ENGLAND
Tel: +44 (0)1943 466060 • Fax: +44 (0)1943 466020
www.chevin-research.com • sales@chevin-research.com
This manual is intended for informational purposes only. All details included herein are subject to change
without notice. Chevin Research Ltd. shall not be held responsible for any damages, direct or indirect,
arising from or relating to the use of this manual.
© Chevin Research Ltd. 2004. All rights reserved.
Mono bridge loading and power outputs (see page 6 for details)
Model Minimum load Power output
A500 1 load of 8Ω 650W
A750 1 load of 8Ω 850W
A1000 1 load of 8Ω 1200W
A1004 1 load of 8Ω 2000W
A1500 1 load of 8Ω 2500W
A2000 1 load of 4Ω 2400W
A3000 1 load of 4Ω 3000W
A4000 1 load of 4Ω 4000W
A5003 1 load of 4Ω 5000W
Q900 1 load of 4Ω per channel pair 3000W per channel pair
Q6 1 load of 8Ω per channel pair 1200W per channel pair
Q1004 1 load of 8Ω per channel pair 2000W per channel pair
Range guide • 1.0c • Dec 2004