Chevrolet Bolt EV 2021 - Page 129

Chevrolet Bolt EV Owner Manual (GMNA-Localizing-U.S./Canada-
14637856) - 2021 - CRC - 10/2/20
128 Infotainment System
turned on. Bluetooth allows wireless
transmission of information among
Bluetooth phones, PDAs, or other devices
within close range by using 2.45 GHz
frequency short-distance wireless
telecommunication technologies. Within this
vehicle, users can make hands-free calls,
transmit hands-free data, and play audio
streaming files by connecting a mobile
phone with the system.
.
There may be restrictions on using
Bluetooth wireless technology in some
locations.
.
Due to the variety of Bluetooth devices
and their firmware versions, the device
may respond differently when performing
over Bluetooth.
.
See the device’s user guide for questions
about Bluetooth functionality.
.
Multi-pairing is not supported.
Pairing and Connecting Bluetooth
To use the Bluetooth feature, make sure the
Bluetooth on the device is turned on and
the device is in discoverable mode. See the
Bluetooth device’s user guide.
When There Is no Paired Device on the
Infotainment System
1. Touch
T.
2. Touch Phone, then Add Device.
3. From the device’s Bluetooth settings list,
select myChevrolet.
4. Touch Code Matches.
5. Verify phone matches.
When the Bluetooth device and
infotainment system are successfully paired,
the Phone screen appears on the
infotainment display.
When the connection fails, a failure message
appears on the infotainment display.
When There Is a Paired Device on the
Infotainment System
1. Touch
T.
2. Touch Settings, then Devices on the
display.
3. Touch the device to pair from the list,
and then follow Step 5.
To add a device not in the list, touch
Add Device.
4. From the device’s Bluetooth settings list,
select myChevrolet.
5. When the Bluetooth device and the
infotainment system are successfully
paired,
e / 5 is displayed.
‐ The connected mobile phone is
highlighted by a
5 mark.
‐ The
e / 5 mark indicates the
hands-free and mobile phone music
function are enabled.
‐ The
5 mark indicates only Hands-Free
function is enabled.
‐ The
e mark indicates only Bluetooth
music is enabled.
.
When the Bluetooth device and the
infotainment system are successfully
paired, the contact list downloads
automatically, depending on the type of
mobile phone. If the contact list does not
download automatically, proceed with the
download on the mobile phone. Always
accept the contact list request on the
initial pairing of the mobile phone.
.
The infotainment system can register up
to 10 Bluetooth devices.
.
When the connection fails, the failure
message displays on the infotainment
system.