Chevrolet Bolt EV 2021 - Page 162

Chevrolet Bolt EV Owner Manual (GMNA-Localizing-U.S./Canada-
14637856) - 2021 - CRC - 10/2/20
Driving and Operating 161
The shift lock release button is designed to
prevent inadvertent shifting out of P (Park)
unless the vehicle has been started, the
brake pedal is applied, and the shift lock
release button is pressed.
When the vehicle is stopped, apply the
brakes and press the button on top of the
shift lever to shift to P (Park).
The vehicle will not shift into P (Park) if it is
moving too fast. Stop the vehicle and shift
into P (Park).
To shift in and out of P (Park), see Shifting
Into Park and Shifting out of Park.
R : Use this gear to back up.
If the vehicle is shifted from either
R (Reverse) to D (Drive), or D (Drive) to
R (Reverse) while the speed is too high, the
vehicle will shift to N (Neutral). Reduce the
vehicle speed and try the shift again.
To shift into R (Reverse):
1. Bring the vehicle to a complete stop.
2. From the center position, move the shift
lever forward, and then to the left. R is
illuminated in red.
3. After releasing the shift lever, it will
return to the center position.
To shift out of R (Reverse):
1. Bring the vehicle to a complete stop.
2. Shift to the desired gear.
3. After releasing the shift lever, it will
return to the center position.
At low vehicle speeds, R (Reverse) can be
used to rock the vehicle back and forth to
get out of snow, ice, or sand without
damaging the electric drive unit.
N : In this position, the propulsion system
does not connect with the wheels. To restart
the propulsion system when the vehicle is
already moving, use N (Neutral) only.
Caution
The vehicle is not designed to stay in
N (Neutral) for extended periods of time.
It will automatically shift into P (Park).
To shift into N (Neutral):
1. From the center position, move the shift
lever forward. If the vehicle is in P (Park),
apply the brake pedal and press the shift
lock release button while moving the
shift lever forward. The shift lever
indicator is illuminated in red.
2. After releasing the shift lever, it will
return to the center position.
To shift out of N (Neutral):
1. Bring the vehicle to a complete stop.
2. Shift to the desired gear.
3. After releasing the shift lever, it will
return to the center position.
Car Wash Mode
This vehicle includes a Car Wash Mode that
allows the vehicle to remain in N (Neutral)
for use in automatic car washes.
Car Wash Mode (Vehicle Off) - Driver In
Vehicle
To place the vehicle in N (Neutral) with the
vehicle off and occupied:
1. Drive to the entrance of the car wash.
2. Apply the brake pedal.
3. Shift to N (Neutral).
4. Turn off the vehicle and release the
brake pedal.
5. The indicator should continue to show N.
If it does not, repeat Steps 2–4.
6. The vehicle is now ready for the
car wash.