Chicago Electric 3663 - User Manual

BANDSAW BLADE WELDER
Model 3663
SET UP AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2003 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised 03d, 07k

Summary

Specifications

Safety Warnings and Precautions

Inhalation Hazard

Exposure to welding fumes can increase health risks, including cancer and other diseases.

Unpacking and Assembly

Unpacking

Check the item for damage or missing parts after unpacking.

Assembly

Connect the unit to a 220V, 1-Phase power source by a licensed electrician.

Operation

Saw Blade Preparation

Trim and clean the ends of the saw blade to ensure a proper weld.

Welding Process

Steps for welding saw blades using the unit, including pressure settings.

Annealing the Weld

Maintenance and Wiring Diagram

Maintenance

Unplug welder before maintenance; clean terminal clamps periodically.

Wiring Diagram

Electrical schematic showing the internal connections of the welder.

Parts Information

Front Panel Parts List and Diagram

Identifies parts on the front panel with a diagram and list.

Parts List

A detailed list of all parts included with the bandsaw blade welder.

Limited Warranty

Chicago Electric 3663 Specifications

General

Brand	Chicago Electric
Model	3663
Category	Welding System
Language	English