Need help?Do you have a question about the Chicago Electric 68887 and is the answer not in the manual?
General| Duty cycle | 20% at 70 A |
|---|---|
| Input voltage | 120 V |
| Output Current Range | 30-90 A |
| Electrode Size Range | 1/16 in. to 3/32 in. |
| Electrode size | 1/16 in. |
Read all safety warnings and instructions for potential electrical shock, fire, and injury.
Essential safety guidelines for operating the welder, focusing on user protection and awareness.
Guidelines to prevent fires caused by arc and hot slag during welding operations.
Managing heat for proper weld penetration based on material thickness.
Causes and solutions for inadequate, proper, or excessive weld penetration.
Diagnosing and resolving problems with wire feeding and bird's nests.
Solutions for when the wire feeds but the arc does not ignite.
Resolving issues where the power switch is on but the welder does not operate.
To Next Page