Chicago Electric 56776 User Manual

Note: Blade sold separately.
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 19j
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2019 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Chicago Electric 56776 Specifications

General

Type	Circular Saw
Blade Size	7-1/4 inches
Voltage	120V
Weight	10.5 lbs
Max Cutting Depth at 90°	2-3/8 inches

Summary

Safety Symbol Definitions

Important Safety Information

General Power Tool Safety Warnings

Core safety practices for work area and electrical safety, applicable to all power tools.

Specifications and Initial Setup

Symbology and Key Components

Explanation of symbols and assembly of table extensions and dust collection bag.

Miter Saw Functions Overview

Detailed Function Explanations

Head Lock-down and Guard Operation

Procedures for locking the head and understanding the automatic guard movement.

Operating Instructions: Blade Replacement

Cutting Adjustments and Support

Workpiece Support and Angle Settings

Using extension supports and setting miter/bevel angles for accurate cuts.

Cutting Preparation and Safety

Depth Stop and Work Area Setup

Setting the depth stop and preparing a safe, effective work area and workpiece support.

General Operating Procedures

Maintenance and Fence Calibration

Cleaning, Lubrication, and Fence Check

Routine cleaning, lubrication, and checking fence perpendicularity for accurate cuts.

Calibration and Kerf Board Adjustment

Indicator Calibration and Kerf Board

Calibrating miter/bevel indicators and adjusting or replacing the kerf board.

Troubleshooting Common Issues

Parts List and Diagram

Assembly Diagram

Limited 90 Day Warranty