What to do if my Chicago Electric Sander won't turn on?
If your Chicago Electric Sander isn't turning on, first, make sure you are firmly squeezing the Power Switch. Also, verify that the Power Cord/Plug is securely connected to a working 120-volt grounded electrical outlet. If it still doesn't work, stop using the Sander and have a qualified technician inspect it.
What to do if the power switch on my Chicago Electric 94748 won't turn off?
If the power switch on your Chicago Electric Sander won't turn off, immediately unplug the Sander from the electrical outlet. After that, stop using the Sander and have a qualified service technician check it out.
How to make my Chicago Electric Sander remove material better?
To improve material removal with your Chicago Electric Sander: * Avoid applying excessive downward pressure. * Increase the speed of the Sander. * Ensure the Sanding Belt isn't dull or clogged. * Use a coarser grit Sanding Belt.
How to prevent gashes when sanding with my Chicago Electric 94748 Sander?
To prevent gashes and hollows when sanding with your Chicago Electric Sander, avoid tilting or rocking the Sander. Also, avoid sanding in one spot for too long.
Guidelines for maintaining a safe work environment and avoiding hazards.
Precautions and guidelines for safe electrical connections and usage.
Guidelines for operator's personal safety during tool operation.
Proper methods for using and maintaining the power tool.
Information on tool service and maintenance by qualified personnel.
Detailed safety precautions specific to the belt sander operation.
Information and warnings regarding proper grounding procedures.
Guidelines for selecting and safely using extension cords.
General| Brand | Chicago Electric |
|---|---|
| Model | 94748 |
| Type | Belt Sander |
| Power Source | Corded Electric |
| Voltage | 120V |
| Dust Collection | Yes |
To Next Page