To Next PageTo Next PageWhat to do if my Chicago Electric 98838 Portable Generator is overheating?
If your Chicago Electric Portable Generator is overheating, first reduce the load on the generator. If that doesn't solve the problem, ensure the generator has sufficient ventilation by moving it to a location with an adequate supply of fresh air.
What to do if my Chicago Electric 98838 Portable Generator has no electrical output?
If your Chicago Electric Portable Generator has no electrical output, try these steps: First, check the circuit breaker and reset it by depressing it. If the problem continues, inspect the power cord for any faults and repair or replace it if necessary. If these steps don't resolve the issue, have a qualified technician check the capacitor and outlets.
Why does the circuit breaker keep tripping on my Chicago Electric Portable Generator?
If the circuit breaker on your Chicago Electric Portable Generator repeatedly trips, it could be due to an overload. Try reducing the load on the generator. Also, check your cords and equipment for any damaged, bare, or frayed wires and repair or replace them.
General| Fuel Type | Gasoline |
|---|---|
| Run Time @ 50% load | 9 hours |
| Outlets | Four 120V 20A, one 120/240V 30A twist-lock |
| Starting System | Recoil |
| Run Time at 50% Load | 9 hours |
| AC Output | 120V |
| DC Output | 12V |
Generator exhaust contains carbon monoxide. It is poisonous.
Warranty void if engine oil is not added or checked properly.
Details about the generator's electrical output and receptacles.
Details about the generator's engine type, power, and fuel.
Guidelines for maintaining a safe and clean work environment.
Guidance on personal safety while operating the generator.
Recommendations for using and maintaining tools with the generator.
Instructions for connecting appliances and loads to AC outlets.
Specific safety rules related to warranty, labels, and upkeep.
Guidelines for placing the generator in a suitable outdoor area.
Procedure for adding and checking engine oil before operation.
Step-by-step guide to starting the engine manually or with battery.
Procedures for oil changes and air filter servicing.
