Chicago Pneumatic CP7111 Series - User Manual

Operator’s Manual
CP7111 & CP7150 Series
Air Hammer
To reduce risk of injury, everyone using, installing, repairing,
maintaining, changing accessories on, or working near this tool
must read and understand these instructions before performing
any such task.
WARNING

Summary

CP7111 & CP7150 Series Air Hammer

Operators Manual Safety Warning

Read and understand instructions before use to reduce injury risk.

Local Sales and Service Locations

Air Supply Requirements

Operation and Lubrication

Caution: Operating Without Chisel

Warning against operating the tool without a chisel to prevent internal damage.

Maintenance

Technical Data and Declarations

Manufacturers Limited Warranty

Declaration of Conformity

Chicago Pneumatic CP7111 Series Specifications

General

Weight	1.8 kg
Length	178 mm
Air Consumption	4 cfm
Working Pressure	6.2 bar (90 psi)
Operating Pressure	6.2 bar (90 psi)
Blows per Minute	3000 bpm
Chisel Size	0.401 in
Chisel Shank	0.401 in
Shank Size	25 mm x 108 mm (1 in x 4.25 in)
Bore	19 mm
Min. Hose Size	10 mm
Sound Level	103 dB