To Next PageTo Next Page
Need help?Do you have a question about the Chicago Pneumatic CP797SP-6 and is the answer not in the manual?
General| Brand | Chicago Pneumatic |
|---|---|
| Model | CP797SP-6 |
| Category | Impact Driver |
| Language | English |
Instructions must be read and understood before using, installing, repairing, or maintaining the tool to reduce injury risk.
Supply tool with 90 psig of clean, dry air. Connect tool to air line using specified pipe, hose, and fitting sizes.
Use air line lubricator or add air motor oil daily. Check clutch oil monthly with SAE #30 oil.
Pull trigger to operate. Turn reverse valve for forward/reverse rotation. Use regulator to adjust output power.
Inspect air motor and clutch every 3 months if used daily. Replace worn parts. Recommended service kits are available.
Declares conformity with Council Directive 98/37/CE for machinery. Product name: CP797 Impact Wrench.
Details include 1" Sq. Dr., 90 psi air, 283 l/min consumption, 1400 ft. lbs. max torque, and applied standards.
Sound pressure 110 dB(A), vibration 7.6 m/s². These are laboratory values for risk assessment.
Shut off air supply when not in use. Never direct air at others. Check hoses and fittings for damage.
Keep away from rotating drive. Do not wear jewelry or loose clothing. Keep hair away from tool and accessories.
Wear eye/face protection. Use only impact-rated sockets in good condition. Use deep sockets.
Be aware of trip hazards. Maintain balance and secure footing. Use hearing protection. Avoid repetitive motions.
Do not modify the tool. Not for use in explosive atmospheres. Operators must be physically capable.
