- 23 -
Maintenance
Maintenance schedule
Before carrying out any maintenance activity, check that the start switch is in position O and that no electrical power is present on the terminals.
Maintenance schedule
Daily Every 500 hours or yearly
Every 1000 hours or 24
months
Service pak
- 1310 3004 22 1310 3004 23
For the most important subassemblies, Chicago Pneumatic has developed service kits that combine all wear parts. These service kits offer you the benefits of genuine parts, save on administration
costs and are offered at reduced price, compared to the loose components. Refer to the parts list for more information on the contents of the service kits.
Check for air, fuel, coolant and oil leakage x x x
Check oil and coolant level xxx
Check or drain water in fuelfilter/waterseparator x x x
Clean air cleaner and dust bowl x x x
Check vaccuum indicator xxx
Visual walk around the unit xxx
Replace engine oil (1) xx
Replace engine oil filter (1) xx
Check/clean radiator/cooler fins xx
Check tension and condition of the drive belt/Replace xx
Grease door hinges and locks xx
Replace fuel filter element xx
Replace fuel prefilter element xx
Check electrolyte level and terminals of battery xx
Check engine mounts xx
Check crankcase ventilation system xx
Check condition of cooling fan assembly xx
Pressure test cooling system xx
Check engine electrical ground connection xx
Replace air filter element (2) xx
Measure alternator insulation resistance xx
Check glycol level in coolant (3) xx
Check PH level of engine coolant (3) xx
Monitor Insulation Resistance of the main alternator xx
To Next Page
Loading...
