Chicco 06627 - Page 72

24
25
playing the image filmed by the video
camera (5) on the child unit.
3.2.2 Adjusting the brightness on the
parent unit display
To adjust the display brightness (4)
access the corresponding sub-menu
by touching its icon on the main menu.
To increase the brightness of the dis-
play (4), touch
until reaching
the required level of brightness and
confirm by touching
.
To decrease the brightness of the dis-
play (4), touch
until reaching
the required level of brightness and
confirm by touching
.
It is possible to select up to 7 bright-
ness levels.
When the setting is conrmed, the
display (4) will automatically switch
to displaying the full screen image
filmed by the video camera (5) on
the child unit. To go back to the main
menu without changing any settings,
touch
.
Note: if, while navigating in the
sub-menu, no point of the display is
touched for 10 seconds, the display
(4) will automatically go back to dis-
playing the image filmed by the video
camera (5) on the child unit.
3.2.3 Setting the zoom
To set the digital zoom on the video cam-
era (5) on the child unit, access the corre-
sponding sub-menu by touching its icon
on the main menu.
The display will show the possibility to
choose between “1x” and “2x”. The green
icon indicates the current function setting
(“1x” is green if the function was not acti-