25
2 450
2 400 –
2 570
Blueto-
oth,
WLAN,
802.11
b/g/n,
RFID
2450,
LTE
Band 7
Pulse
modula-
tion
b
)
217 Hz
2 0,3 28 28
5 240
5 100 –
5 800
WLAN
802.11
a/n
Pulse
modula-
tion
b
)
217 Hz
0,2 0,3 9 95 500
5 785
NOTE: If necessary to achieve the IMMUNITY TEST LEVEL, the distance
between the transmitting antenna and the ME EQUIPMENT or ME
SYSTEM may be reduced to 1 m. The 1 m test distance is permitted
by IEC 61000-4-3.
a) For some services, only the uplink frequencies are included.
b) The carrier shall be modulated using a 50 % duty cycle square wave
signal.
c) As an alternative to FM modulation, 50 % pulse modulation at 18 Hz
may be used because while it does not represent actual modulation, it
would be worst case.
Recommended separation distance between portable and mobile
RF communications equipment and the Comfort Quick
00000656000000.
The Comfort Quick 00000656000000 is intended for use in an electromagnetic
environment (for home healthcare) in which radiated RF disturbances are con-
trolled. The customer or the user of the Comfort Quick 00000656000000 can
help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and
the Comfort Quick 00000656000000 as recommended below, according to the
maximum output power of the communications equipment.
Rated maxi-
mum output
power of
transmitter
W
Separation distance according to frequency of
transmitter
M
150 KHz to 80 MHz
d = 1,2 √P
80 MHz to 800
MHz
d = 1,2 √P
800 MHz to 2,7
GHz
d = 2,3 √P
0.01 N/A 0.12 0.23
0.1 N/A 0.38 0.73
1 N/A 1.2 2.3
10 N/A 3.8 7.3
100 N/A 12 23
To Next Page
Loading...
